Форум
Добро пожаловать, Гость
Логин: Пароль: Запомнить меня
  • Страница:
  • 1

ТЕМА: Пометки для ремонта HDD под Linux

Пометки для ремонта HDD под Linux 4 года 8 мес. назад #22

  • aero111
  • aero111 аватар
  • Вне сайта
  • Модератор
  • Сообщений: 31
  • Репутация: 0
Полезные команды при работе с HDD

alexandr.sysoev.ru/node/162
www.mintlinux.ru/forum/thread1436.html
Восставшие
alldebian.ru/gparted-oshibka-chteniyazapisi-chto-delat

habrahabr.ru/post/140289/
white55.narod.ru/hdd.html
hdd-911.com/index.php?option=content&tas...id=80&Itemid=27#smrt
win---
ab57.ru/hdd.html
www.hdd-911.com/index.php?option=com_docman&Itemid=31



www.ferra.ru/ru/storage/s25355/


# smartctl --all /dev/sda
smartctl 5.42 2011-10-20 r3458 [i686-linux-2.6.32-279.el6.i686] (local build)
Copyright (C) 2002-11 by Bruce Allen, smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.12
Device Model: ST3500418AS
Serial Number: 9VME0GRM
LU WWN Device Id: 5 000c50 02042b0a8
Firmware Version: CC38
User Capacity: 500 106 780 160 bytes [500 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 4
Local Time is: Fri Jan 18 23:16:39 2013 ORAT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: FAILED!
Drive failure expected in less than 24 hours. SAVE ALL DATA.
See vendor-specific Attribute list for failed Attributes.

General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 600) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 85) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x103f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 092 079 006 Pre-fail Always - 210242083
3 Spin_Up_Time 0x0003 098 097 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 094 094 020 Old_age Always - 6569
5 Reallocated_Sector_Ct 0x0033 003 003 036 Pre-fail Always FAILING_NOW 3984
7 Seek_Error_Rate 0x000f 078 060 030 Pre-fail Always - 81869447
9 Power_On_Hours 0x0032 094 094 000 Old_age Always - 5477
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 097 097 020 Old_age Always - 3331
183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 119
188 Command_Timeout 0x0032 099 097 000 Old_age Always - 25770197023
189 High_Fly_Writes 0x003a 099 099 000 Old_age Always - 1
190 Airflow_Temperature_Cel 0x0022 069 058 045 Old_age Always - 31 (Min/Max 31/31)
194 Temperature_Celsius 0x0022 031 042 000 Old_age Always - 31 (0 15 0 0 0)
195 Hardware_ECC_Recovered 0x001a 044 035 000 Old_age Always - 210242083
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 18
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 18
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 63131724290264
241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 2518340554
242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 222721483

SMART Error Log Version: 1
ATA Error Count: 23173 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 23173 occurred at disk power-on lifetime: 5476 hours (228 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
04 71 04 9d 00 32 e0

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- --

ec 00 01 01 00 00 a0 00 00:47:19.638 IDENTIFY DEVICE
00 00 00 00 00 00 00 04 00:47:18.565 NOP [Abort queued commands]
00 00 00 00 00 00 00 ff 00:47:04.409 NOP [Abort queued commands]
00 00 00 00 00 00 00 ff 00:47:00.227 NOP [Abort queued commands]
00 00 00 00 00 00 00 ff 00:46:58.772 NOP [Abort queued commands]

Error 23172 occurred at disk power-on lifetime: 5476 hours (228 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
04 71 04 9d 00 32 e0 Device Fault; Error: ABRT

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- --

a1 00 00 00 00 00 a0 00 00:26:36.567 IDENTIFY PACKET DEVICE
ec 00 00 00 00 00 a0 00 00:26:33.745 IDENTIFY DEVICE
00 00 00 00 00 00 00 04 00:26:33.579 NOP [Abort queued commands]
00 00 00 00 00 00 00 04 00:26:27.574 NOP [Abort queued commands]
a1 00 00 00 00 00 a0 00 00:26:22.589 IDENTIFY PACKET DEVICE

Error 23171 occurred at disk power-on lifetime: 5476 hours (228 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
04 71 04 9d 00 32 e0

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- --

ec 00 00 00 00 00 a0 00 00:26:33.745 IDENTIFY DEVICE
00 00 00 00 00 00 00 04 00:26:33.579 NOP [Abort queued commands]
00 00 00 00 00 00 00 04 00:26:27.574 NOP [Abort queued commands]
a1 00 00 00 00 00 a0 00 00:26:22.589 IDENTIFY PACKET DEVICE
ec 00 00 00 00 00 a0 00 00:26:22.583 IDENTIFY DEVICE

Error 23170 occurred at disk power-on lifetime: 5476 hours (228 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
04 71 04 9d 00 32 e0 Device Fault; Error: ABRT

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- --

a1 00 00 00 00 00 a0 00 00:26:22.589 IDENTIFY PACKET DEVICE
ec 00 00 00 00 00 a0 00 00:26:22.583 IDENTIFY DEVICE
00 00 00 00 00 00 00 04 00:26:22.457 NOP [Abort queued commands]
c8 00 80 80 3a ee e2 00 00:25:41.040 READ DMA
c8 00 80 00 3a ee e2 00 00:25:41.031 READ DMA

Error 23169 occurred at disk power-on lifetime: 5476 hours (228 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
04 71 04 9d 00 32 e0

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- --

ec 00 00 00 00 00 a0 00 00:26:22.583 IDENTIFY DEVICE
00 00 00 00 00 00 00 04 00:26:22.457 NOP [Abort queued commands]
c8 00 80 80 3a ee e2 00 00:25:41.040 READ DMA
c8 00 80 00 3a ee e2 00 00:25:41.031 READ DMA
c8 00 80 00 46 de e2 00 00:25:37.076 READ DMA

SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed: unknown failure 90% 5464 0

SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Darcon Portal- Всё о системе Linux, новости и практика применения.
Последнее редактирование: 4 года 7 мес. назад от aero111.
Для ответа необходима авторизация.
  • Страница:
  • 1
Модераторы: aero111
Время создания страницы: 0.136 секунд
types of cars
Каталог@MAIL.RU - каталог ресурсов интернет Каталог ссылок, Top 100. Каталог webplus.info